AtomEVE available!
Check it out!
December 2014
3D Printed LCD holder
4 pcs glued together.. my own custom design. Measured my own screen as well. Ill upload stl later. Works nice but might make it a bit thicker.
Saleae 3D Printed Condo
I had to design and print a little house for my Saleae logics. They fit lose but a little rubber foot makes them snug. Logic 4 on top and 2…
Saleae just in
Got my Saleae logic 4 today! I ordered extra clips for my other logics 🙂
3D printer! Finally
Finally got my hands on a3d printer had to fix it but worth it. $299 used and not calibrated. Its a da Vinci 1.0. First issue was calibration. Had spent…
Arduino-AtomRTC fun!
I was board and decided to connect my Arduino Pro Mini (3.3v) and my AtomRTC along with my breadboard buddy pro on my breadboard. I can program the arduino using…
AtomRTC Now in shop!
AtomRTC Uses the MAXIM DS3234 RTC Chip and a single CR1225 battery. Basic, Simple and Inexpensive. Just in time for Christmas 🙂
MiniFT80x V1
Check it out! Now with CAPACITIVE TOUCH SUPPORT! Thoughts 🙂
MiniFT800 V1 Coming soon!
Take a look at whats to come, its my FT800 pcb but complete 🙂 Its untested but should work. I took a couple ideas from the GameDuino2 and there forum…
New TinyLED versions!
4 bit: https://www.tindie.com/products/AtomSoft/tinyledx4/ 8 bit: https://www.tindie.com/products/AtomSoft/tinyledx8/