Ok designed a new PCB… LipoOne or LiOne is a Lipo Charger… yes there are a ton out there using the same IC… but none by me 🙂
My PCB adds a micro switch and easy silk screen with a small size and price. Under $10!
Selectable 100mA or 500mA charge current, charge LED indication and switch. Using standard 2mm JST connector for lipo and 2.54mm (0.1″) connector for SYSTEM OUT PUT with SIMPLE + (Lipo Power) and – (Lipo Gnd). The switch doesnt cut charger power. It cuts system power. So you can charge while now powering a external pcb. LED is also using a larger resistor since i tend to notice these LEDs are too bright.
